[Shipping for this product takes approximately 3-6 business days. Actual stock availability is subject to on-site conditions.]
Product Introduction
Bambu PLA Basic is the most common 3D printing material, characterized by easy printing and low cost. Compared to general PLA, this series is optimized for high-speed printing, achieving speeds of 250–300 mm/s, and offers better toughness and Z-axis interlayer strength. Additionally, it is biodegradable in certain composting environments.
Basic Information
-
Material Composition: PLA
-
Appearance: Odorless
-
Diameter: 1.75 mm
-
Net Weight: 1 kg
-
Spool Material: ABS (Heat resistant up to 70 °C)
-
Spool Dimensions: Diameter 200 mm, Height 67 mm
Recommended Printing Parameters
-
Drying Conditions: 50 °C × 8 h (or heated bed 60–70 °C × 12 h)
-
Storage Humidity: ＜20% RH (sealed + desiccant)
-
Nozzle Diameter: 0.2 / 0.4 / 0.6 / 0.8 mm
-
Nozzle Temperature: 190 – 230 °C
-
Heated Bed Temperature: 35 – 45 °C
-
Printing Speed: ＜300 mm/s
-
Retraction Length: 0.6 – 1.0 mm
-
Retraction Speed: 20 – 40 mm/s
-
Chamber Temperature: 25 – 45 °C
-
Cooling Fan: On
-
Maximum Overhang Angle: 55°
-
Maximum Bridging Length: 30 mm
-
Support Material: PLA Support
Note: When using Bambu PLA BASIC filament, please store it properly to prevent moisture from affecting print quality. It is recommended to use a cooling fan during printing to improve molding effects, and adjust temperature and retraction settings as appropriate for your printer model to reduce stringing. To ensure strong model adhesion, consider using glue, tape, or a PEI plate for enhanced platform adhesion. With proper adjustments, you can consistently produce high-quality prints.
